Project Dashboard

TTMG Project (149562)
Proposal Status: Conformity Determination Issued
Project Overview
Type of application: New
Proponent name: Gregory Bronson
Company: Rae-co Consulting Ltd
Schedule:
Start Date: 2021-07-01
End Date: 2023-09-30
Operation Type: Seasonal
Project Description:
Bathurst Metals Ltd (BM) is a junior mining company focused on the exploration and discovery of economic mineral deposits in Canada’s north. BM holds the Turner Lake, TED, McAvoy Lake and Gela Lake (“TTMG”) mineral claims in Nunavut. The claims are located on Inuit Owned Lands administered by the KIA. BM proposes to conduct surface mapping and geological sampling on the mineral claims. BM crews will be based out of Bathurst Inlet Lodge and helicopter to and from the mineral claims daily for the duration of the work. It is expected that the work will take approximately three to four weeks to complete.
Personnel:
Persons: 12
Days: 30
Project Map
List of all project geometries:
ID Geometry Location Name
7842 polygon 102507
Planning Regions:
Qikiqtani
Affected Areas and Land Types
Inuit Owned Surface Lands
Settlement Area
Project Land Use and Authorizations
Project Land Use
Mineral Exploration
Mineral Exploration
Licensing Agencies
No data found.
Other Licensing Requirements
No data found.
Material Use
Equipment
Type Quantity Size Use
Helicopter 1 5m X 5m Transportation to/from mineral claims from Bathurst Inlet Lodge
Rock saw 1 0.8m X 0.3m Rock sample collection
Fuel Use
Type Container(s) Capacity UOM Use
Aviation fuel 50 205 Liters Helicopter fuel
Gasoline 1 205 Liters Rock Saw fuel
Propane 2 100 Lbs Cooking fuel
Hazardous Material and Chemical Use
Type Container(s) Capacity UOM Use
Lysol 6 1 Liters Disinfectant
Purell 6 1 Liters Hand Sanitizer
Two Cycle Motor Oil 1 1 Liters 2-cycle engine oil for rock saw
Waste Oil 2 20 Liters Waste oil from Helicopter maintenance
Water Consumption
Daily Amount (m3) Retrieval Method Retrieval Location
0
Waste and Impacts
Environmental Impacts
Environmental Impacts of this project will be minimal. All garbage generated on the mineral claims during our work there will be bagged and transported back to Bathurst Inlet Lodge. Environmentally benign waste will be incinerated at the waste management site adjacent Bathurst Inlet Lodge. Recyclable materials such as scrap metal will be transported to Bathurst Inlet Lodge and taken to the nearest recycling facility in Yellowknife at the end of the project. Any non‐recyclable, non‐combustible waste generated by the project will be transported to the regional community landfill at Yellowknife. All opportunities will be taken to reuse or recycle hazardous waste materials. Any hazardous waste produced because of the TTMG Project will be placed in sealed containers, labeled, and stored within secondary containment such as Arctic InstaBerms, or similar, until they can be reused or backhauled for recycling or disposal. Upon seasonal shutdown all hazardous wastes will be backhauled and disposed of properly to a registered hazardous waste receiver.
Waste Management
Waste Type Quantity Generated Treatement Method Disposal Method
Combustible wastes 20 kg Non-combustible remains will be collected and backhauled to Yellowknife for disposal in a permitted landfill Combustible wastes will be incinerated at the waste management area at Bathurst Inlet Lodge
Hazardous waste 40L Hazardous waste will be disposed of at a permitted hazardous waste management facility. Hazardous waste will be backhauled to Yellowknife at the end of the project.
Non-Combustible wastes 5 kg Non-combustible wastes will be backhauled to Yellowknife for disposal in a permitted landfill Non- combustible wastes will be back hauled to Yellowknife at the end of the project.
Sewage (human waste) 50 kg Unburned human waste will be subjected to additional incineration events until none remains Human waste generated while at Bathurst Inlet Lodge will be collected and burned at the waste management area adjacent the lodge. Human waste generated while on the mineral claims will be buried in a chosen location where the waste cannot enter or contaminate any water body or be disturbed by wildlife.
Category: Imported geometry - proect geometry
Recieved: 2021-05-26
Originator: Gregory Bronson
Public Registry ID: 18723
Document Size: 7.62 Kb
Category: Imported geometry - proect geometry
Recieved: 2021-05-26
Originator: Gregory Bronson
Public Registry ID: 18724
Document Size: 1.57 Kb
Category: Imported geometry - proect geometry
Recieved: 2021-05-26
Originator: Gregory Bronson
Public Registry ID: 18725
Document Size: 14.8 Kb
Category: Application form attachment - Fuel Use
Recieved: 2021-05-26
Originator: Gregory Bronson
Public Registry ID: 18726
Document Size: 13134.13 Kb
Category: Application form attachment - Fuel Use
Recieved: 2021-05-26
Originator: Gregory Bronson
Public Registry ID: 18727
Document Size: 8726.11 Kb
Category: Application form attachment - Other Authorizations
Recieved: 2021-05-26
Originator: Gregory Bronson
Public Registry ID: 18729
Document Size: 9484.84 Kb
Category: Application form attachment - Project description
Recieved: 2021-05-26
Originator: Gregory Bronson
Public Registry ID: 18728
Document Size: 9350.7 Kb
Category: Application related document - Conformity Determination Letter
Recieved: 2021-06-07
Originator: Solomon Amuno
Public Registry ID: 18741
Document Size: 250.06 Kb