Project Dashboard

Anuriqjuak Nukkiksautiit Project (149782)
Proposal Status: Conformity Determination Issued
Project Overview
Type of application: New
Proponent name: Heather Shilton
Company: Nunavut Nukkiksautiit Corporation
Schedule:
Start Date: 2024-07-13
End Date: 2044-07-13
Operation Type: Annual
Project Description:
The Anuriqjuak Nukkiksautiit Project is a wind energy and storage platform tailored for deployment in the Hamlet of Sanikiluaq. The current project configuration recommendation consists of 1,000 kW wind energy and 500 kWh battery energy storage system. A meteorological evaluation tower was installed in the community in March 2017 and actively collects raw wind data. A bankable Wind Resource Assessment was completed by Zephyr North based on the data collected. The Site-Specific Wind Resource Assessment confirmed that the wind resource in the area is promising. The project aims to provide clean, affordable, and reliable energy to the community while assuring local ownership, job creation, and a local economic boost. A primary goal of the project is to reduce diesel reliance for electricity production in the community by at least 50%. While the annual offset will remain the same, it is expected that there will be periods of time where the penetration rate is exceeded, especially in the winter months. As such, early analysis is ongoing to determine any potential to use excess electricity to generate heat locally for the community buildings, or if there may be an opportunity to integrate additional storage technologies into the facility.
Personnel:
Persons: 30
Days: 389
Project Map
List of all project geometries:
ID Geometry Location Name
8811 polygon Project Area Under Consideration
8812 polygon Collector Station
8813 polygon Plant Expansion Works
8814 polyline Site Access Road
8815 polyline Site Road
8816 polyline Transmission Line
8817 polyline WTG Collector Line (North Branch)
8818 polyline WTG Collector Line (South Branch)
8819 point Turbine
8820 point Turbine
8821 point Turbine
8822 point Turbine
8823 point Turbine
8824 point Turbine
8825 point Turbine
8826 point Turbine
8827 point Turbine
8828 point Turbine
Planning Regions:
Qikiqtani
Affected Areas and Land Types
Municipal
Settlement Area
Project Land Use and Authorizations
Project Land Use
Permanent Structures
All-Weather Road Access
Licensing Agencies
CG&S: 0
GN-QEC: 0
NWB: Type B Licence
NIRB: Screening Decision Report
Other Licensing Requirements
No data found.
Material Use
Equipment
Type Quantity Size Use
Dump Truck 2 23'8L x 9'6 W x 9'4H Carry materials to, around, and from Project site.
Loader 1 25'5L x 9'6W x 11'6H Transfer and move materials around Project site.
Excavator 2 13'4L x 11'2W x 10'5H Excavate materials from the ground for various Project activities.
Dozer 1 15'10: x 8'2W x 10'2H Pushing, moving, and levelling materials around Project site.
Roller 1 18'2L x 7'10W x 9'9H Crush, apply pressure, and roll materials for Project road development.
Crusher 1 44'0L x 10'3W x 11'2H Create crushed materials for Project site.
Screen 1 56'6 x 56'10W x 19'1H Process materials for Project site.
Pickup Truck 1 19'6L x 6'9W x 6'4H Transportation and storage of materials, goods, personnel, etc., to, around, and from Project site.
Side by Side ATV 1 9'10L x 4'2W x 5'9H Transportation of materials, goods, personnel, etc., to, around, and from Project site.
Fuel Use
Type Container(s) Capacity UOM Use
Diesel 1 50 Gallons Diesel genset fuel. Anticipated to consume approximately 50 gallons/day for a total of approximately 8,000 gallons over the life of the project. The No. of Containers/Container Capacity is completed to represent one day's worth of diesel.
Diesel 2 100 Gallons 2x dump truck fuel capacity (100 gallons). Anticipated to consume the full capacity in approximately two days for a total of approximately 10,000 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent each of the dump trucks estimated fuel capacity.
Diesel 1 78 Gallons 1x loader fuel capacity (78 gallons). Anticipated to consume the full capacity in approximately two days for a total of approximately 3,900 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent the loader's estimated fuel capacity.
Diesel 2 148 Gallons 2x excavator fuel capacity (148 gallons). Anticipated to consume the full capacity in approximately two days for a total consumption of approximately 14,800 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent each of the excavators estimated fuel capacity.
Diesel 1 82 Gallons 1x dozer fuel capacity (82gallons). Anticipated to consume the full capacity in approximately two days for a total consumption of approximately 4,100 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent the dozer's estimated fuel capacity.
Diesel 1 174 Gallons 1x crusher fuel capacity (174 gallons). Anticipated to consume the full capacity in approximately two days for a total consumption of approximately 8,700 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent the crusher's estimated fuel capacity.
Diesel 1 66 Gallons 1x roller fuel capacity (66 gallons). Anticipated to consume the full capacity in approximately two days for a total consumption of approximately 3,300 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent the roller's estimated fuel capacity.
Gasoline 1 29 Gallons 1x pick-up truck fuel capacity (29 gallons). Anticipated to consume the full capacity in approximately one week for a total of approximately 928 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent the pick-up truck's estimated fuel capacity.
Gasoline 1 10 Gallons 1x ATV fuel capacity (10 gallons). Anticipated to consume the full capacity in approximately one week for a total of approximately 320 gallons over the course of the project. The No. of Containers/Container Capacity is completed to represent the ATV's estimated fuel capacity.
Hazardous Material and Chemical Use
Type Container(s) Capacity UOM Use
Hydraulic Fluid 1 100 Liters The anticipated equipment will require hydraulic fluids, but the total number of containers and volumes have not yet been determined.
Oil/Grease 1 100 Liters The anticipated equipment will require hydraulic fluids, but the total number of containers and volumes have not yet been determined.
Water Consumption
Daily Amount (m3) Retrieval Method Retrieval Location
10 Delivery from community water truck Near project site & community
Waste and Impacts
Environmental Impacts
A Biophysical Impact Assessment has been completed and addresses the environmental effects of the construction, operation, and decommissioning Project phases. The information to date has shown that no significant adverse residual impacts on the Valued Ecosystem Components (VECs) identified are likely. For details pertaining to proposed mitigation measures, see the attached Project Proposal (Biophysical Impact Assessment is included as an appendix).
Waste Management
Waste Type Quantity Generated Treatement Method Disposal Method
Combustible wastes Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Hazardous waste Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Non-Combustible wastes Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Overburden (organic soil, waste material, tailings) Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Sewage (human waste) Unknown at this time Unknown at this time All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Combustible wastes Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Hazardous waste Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Non-Combustible wastes Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Overburden (organic soil, waste material, tailings) Unknown at this time N/A All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Sewage (human waste) Unknown at this time Unknown at this time All methods of disposal for all Project waste will align with current community practices while ensuring it is safe and practicable.
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20057
Document Size: 1.93 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20058
Document Size: 1.64 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20059
Document Size: 1.65 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20060
Document Size: 21.43 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20061
Document Size: 3.53 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20062
Document Size: 3.7 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20063
Document Size: 5.08 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20032
Document Size: 21.43 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20064
Document Size: 5.73 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20033
Document Size: 1.93 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-05
Originator: Heather Shilton
Public Registry ID: 20065
Document Size: 3.36 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20034
Document Size: 1.64 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20035
Document Size: 1.65 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20036
Document Size: 3.53 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20037
Document Size: 3.7 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20038
Document Size: 5.08 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20039
Document Size: 5.73 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20040
Document Size: 3.36 Kb
Category: Imported geometry - proect geometry
Recieved: 2022-05-04
Originator: Heather Shilton
Public Registry ID: 20041
Document Size: 21.43 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20495
Document Size: 496.32 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20494
Document Size: 23092.05 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20487
Document Size: 874.69 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20488
Document Size: 13900.67 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20489
Document Size: 7258.2 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20490
Document Size: 2536.89 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20491
Document Size: 687.33 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20492
Document Size: 1654.85 Kb
Category: Application form attachment - Project description
Recieved: 2022-07-04
Originator: Heather Shilton
Public Registry ID: 20493
Document Size: 1649.4 Kb
Category: Application related document - Conformity Determination Letter
Recieved: 2022-07-22
Originator: Goump Djalogue
Public Registry ID: 20570
Document Size: 251.91 Kb